Category Archives: Clothing

The first UFO of 2019

Ok, I will admit that I did the very first part of my WinterWear Designs Fashionista* last year, but because I filed it away over Christmas and New Year, I’m counting this as my first UFO for 2019.

The Fashionista* has a shaped front yoke which looks really good, but did prove a little challenging to sew accurately. I know there’s a slight catch in the front section below the yoke, but there’s a matching one on the other side so I’m calling it a design feature rather than a mistake 😉

The back still needs pressing from where the middle panel was stored folded, but it’s looking like the variegated topstitching thread was worth buying. I chose to only do one line of topstitching instead of two, but I’m using a triple straight stretch stitch so it shows up more than a regular stitch.


That’s the front and back panels complete, so I’ll be working on the shoulder seams next, before diving into the sleeves. Denim jackets normally are unlined, but I spotted this ex-designer fabric on the Minerva Crafts website and thought it could make an interesting addition to my Fashionista. Once I’ve got the sleeves attached, I’ll then work on the lining, before adding the front plackets, cuffs and waist band…. or at least that’s the plan – it might well end up unlined if I can’t figure out how to add a lining!


Starting the Denim Fashionista (this post) – Part way through the Denim Fashionista – Finished Denim Fashionista



* affiliate link
Pattern: Fashionista * by WinterWear Designs*
Fabric:
Denim and topstitching thread from Sewing Studio
Lining fabric from Minerva Crafts

Another pair of jeans, another mistake

I really don’t know how I’m making so many mistakes with jeans at the moment – my first ever pair of denim jeans came out as I expected, but since then my jeans have been going wrong!

First let’s start with the positives on these Real Deal Jeans*. I decided to do some decorative top stitching on the back yoke, and also for the back pockets. The yoke stitching isn’t overly visible unless you look closely, but that doesn’t matter as the anchor pattern is quite bold anyway.

So the back was a definite success, which means the front must have the disaster, right? I don’t know if it’s just the way I put the zip in, or if I’m missing something in the instructions, but the left side is a different height at the waistband to the right-hand side.

This is the same pair of jeans – I didn’t use the flash for this photo, so it came out a bit darker than the real shade of blue

What seems to happen, is that the zip moves (despite being pinned), and ends up slightly higher on the second side. I had this before with my Penguin RDJs but while my Dawn jeans didn’t have this mistake, these anchor jeans have a more noticeable difference between the left and right at the waistband.

Not only that, but I had a disaster with the button – when I hammered it in, it ended up skewed. 

So before I get on and sort the hem to finish these off, does anybody have any recommendations for how to remove the hammered-in button, and also to resolve the waistband problem, or will I be stuck with that lopsidedness forever?


* affiliate link
Pattern:  Real Deal Jeans* by WinterWear Designs*
Fabric: Anchor denim from Sewing Studio

Baby Tee

I hardly ever make baby clothing, but when a neighbour was expecting I decided it was a good excuse to try out a Patterns for Pirates free pattern to make a tee.

I will admit I made several mistakes in the sewing, most of which came about because it’s a much smaller size than I’ve ever sewn before! The lap part of the tee (where the back panel laps over the front) isn’t quite sewn into the seams fully… but it’ll be perfectly wearable until the little’un grows out of it!

And of course, I had to make a card to go with it. I just hope the tee fits little J!


Pattern: Wee Lap Tee by Patterns for Pirates
Fabric: Jersey from Sewing Studio
Card: graphics from FreePik.com

Why do jeans always go wrong?

The front of my latest Dawn Jeans came out near enough perfect – the front left lines up with the front right, and the button hammered in exactly straight.

However, when it comes to the back, it all goes wrong! In top stitching the waistband down, I seem to have a bunch of denim, but no corresponding bulk for the waistband lining.

Of course I thought it was a good idea to top stitch using a triple straight stretch stitch, which is one of the most challenging stitches to unpick.

So before I reach for the seam ripper, does anyone have any hints or tips for the best way to unpick my mistakes?


Pattern: Dawn Jeans by Megan Nielsen 
Fabric: stretch denim from Mibs Fabrics
Inner waistband & pocket bags – polycotton from Fashion Fabrics

Going Rogue

If you were to tell me a couple of months ago that I would have made a pair of socks, I’d have jut laughed and pointed out that I never got the hang of knitting in the round… it wouldn’t have dawned on me that sewn socks were even a thing!

But they are, and I’ve tried making a pair!

The front looks quite accurate, but I think I need to work on the heel insert a little more – the base of the heel looks quite rectangular to me, although that could just be down to the recipient’s feet not quite being the same size as the socks!

My next pair will be without the heel insert, to see how comfortable that is – I don’t usually wear heel-less socks, but if they’re comfy then it’ll be a much faster sew!


Pattern: Going Rogue Socks by The Wolf and the Tree
Fabric: Jersey remnants from Fashion Fabrics

Dawn Jeans

I was lucky enough to be chosen as a pattern tester for the amazing Megan Nielsen Dawn Jeans and couldn’t get my fabric prepared fast enough!

The Dawn Jeans come with four options – tapered, straight, wide, and shorts. Originally I was going to make the shorts, but decided in the end to try the wide leg jeans.

These jeans are meant to have a vintage feel – kind of classic Levis, so I chose some reasonably heavy denim which had a slight give rather than any real stretch.

As I mentioned on Tuesday, I don’t use topstitching thread – I know, dreadful isn’t it! When I bought my sewing machine, the shop manager enlightened me that if you use particular stitches, you can get the effect of topstitching without needing to invest in specific thread.

I prefer the look of the triple straight stretch stitch out of the options I have, and it means I can liven up my jeans without needing to buy in lots of specific thread too!

Dawn is drafted with a high waist, which I didn’t alter at all. It actually hits at a comfortable level for me, despite being only 5′ 1″, which meant I didn’t have to try and work out any alterations – yay!

Unlike other trouser patterns I’ve used before, Dawn’s pocket bags are actually sewn inside out, so the right side of the fabric shows on the inside of the jeans. Using the same fabric as the inner waistband means they blend nicely – and the inner waistband also gave me a chance to add some fancy stitching too:

Strictly speaking, the inner waistband is meant to be denim, but I was trying to squeeze these jeans out of a metre of fabric, so I only had enough for the outer waistband! I also didn’t have quite enough for a proper hem, so I added some bias binding around the raw edge to prevent it from fraying, before sewing the hem.

I also stitched lower down on the hem in a matching thread, just to make it a bit stronger.

I took in the width by a few inches on the legs, as they were a bit too wide for me! But overall, these jeans are a great fit, didn’t require much alteration other than the width (and that’s down to personal choice anyway), and I’m just waiting for the weather to get a little cooler now, so I can wear them!

One pair made, but why stop at just one?

Buoyed on by my success with those, I decided to try a straight leg pair. These are made from a lighter weight stretch denim, but I’ve stuck with the same size as my previous ones. I did have a bit of a disagreement with the button when it came to hammering it in place, but other than that, these are also really comfortable!

I wanted to do something different with the pockets on these, so this is actually glow-in-the-dark embroidery thread! I had a semi-disaster with the interfacing I’d put on the back of the pocket – I managed to melt it over the iron – so I added a lining to the pocket, to hide the gummy interfacing and also to prevent the stitches getting caught on the inside.

Again, I used the same fabric for the pocket bags and inner waistband, but this time I doubled up on the inner waistband fabric to make it stronger. 

No modelled photos of these yet, as they’re still in the UFO stage until I can get the hem measured and stitched!

I doubt I’ll be making a tapered-leg pair, as that isn’t a style I wear, but I’m planning on making some shorts for next summer if I can find some lighter weight denim, or maybe a linen blend fabric!

So what are you waiting for? Head over to Megan Nielsen, and check out the Dawn Jeans!


Pattern: Dawn Jeans by Megan Nielsen 
Fabric:
Wide-leg jeans – non-stretch denim from Sewing Studio
Straight-leg jeans – stretch denim from Mibs Fabrics
Inner waistband & pocket bags – polycotton from Fashion Fabrics

Topstitching Jeans

In preparation for an amazing pattern release later this week, I thought I’d share a quick video I made for how I tackled the topstitching over a bulky seam. 

I use regular thread, and a straight stretch stitch for strength… well, it also looks pretty good too! But going over a bulky seam is a bit of a nightmare if those stitches don’t come out straight, so how do you do it?

You could just a piece of folded fabric, or maybe some thick folded card – they’d both give the same result. But I’m using the button shank plate (which I’ve also seen called a Jean-a-ma-jig) that I got as a special deal from the shop when I bought my machine.. Normally the button shank plate is £8, but I’ve seen Jean-a-ma-jigs for about half that, so it’s worth looking round for a good price!

Ok, so how do you use it?

Sew as normal just to the point where the foot starts to lift at the front, as it tries to climb over the bulky seam.

For my button shank plate, there’s a thick side and a slightly tapered side (on the right in this photo). With the needle down, lift the foot, and gently push the tapered side under the foot at the back. Lower the foot again….

….it should now look like this! Slowly sew – you may need to use the hand wheel, depending on your machine and the thickness of your fabric!
Once the machine has stitched past the bulk, you can remove the button shank plate from the back.

Because that probably sounds way more complicated than it actually is, here’s a quick video of the button shank plate in action. I hold it in place to start with simply because I’m using a triple straight stretch stitch – that goes backwards on every third stitch, and I wanted to make sure my needle didn’t hit the plastic plate!

And there you have it – a little tip to help get topstitching to work over those bulky jeans seams!

Glowing Dragons – finished!

Picking another random item from my UFO pile, these glowing dragon Zen Pants* are my latest finished item! 

I made exactly the same mistake I did with my Chameleon Zen Pants* and ended up with a slightly wavy waistband yet again. I really need to figure out the best length of elastic to use, so I don’t make that mistake again!

But that mistake and the mess of the back pockets aside, these Zen trousers didn’t come out too terribly. They are really comfy, and hopefully the fabric will have a great glow when it’s dark!

I did get a photo of the dragons glowing, although as yet I’ve not been able to get a photo of them glowing while they’re being worn.


* – affiliate link
Pattern: Zen Pants* by 5 out of 4 Patterns
Fabric: Cotton Elastane from Sewing Studio

Glowing Dragons UFO

I couldn’t resist this glow in the dark fabric, but what is the best thing to make from it? In the shop, they suggested pyjamas, but I wanted something I could wear outside in the dark. I could make a t-shirt, but I don’t go outside in the dark until the autumn, and by that point it’s too chilly to be outside without a jumper on!

So I settled for another pair of Zen Pants*, as that would be just warm enough to wear outside in autumn…. or at least that’s my aim – we’ll see what happens!

My sewing machine did have a few disagreements with the stitches on the back pockets, so they are a bit of a mess. Hopefully my machine will co-operate when I come to finish them though.


* – affiliate link
Pattern: Zen Pants* by 5 out of 4 Patterns
Fabric: Cotton Elastane from Sewing Studio